>> ATMEGA 8 used a lot in arduino kits and in this post we will show you how to make a simple programmer for atmega8.
Main components :
1) components for the programmer.
2) components for the board
Schematic diagram :
The board circuit diagram :
>> to use this programmer you have to use PonyProg software which can be downloaded at the following link :
>> after installing the software adjust the connection paramters as following :
>> then connect the cable and choose avr micro and atmega8 as shown :
>> open the hex file as shown :
>> then press command and choose write program flash and the following message will appear :
>> press yes and the writing process started :
===========================================================
DONE
Simple Programmer for ATMEGA8